The Effective Stress Path for Soil at High Pressure
The effect of increasing stiffness in the soil skeleton on the effective stress path in undrained triaxial compression tests is experimentally examined and found to not be significant....
A Sphere Moving Down an Inclined Bumpy Surface
A sphere moving down a bumpy incline in the air is studied theoretically and experimentally. A method based on the principle of energy conservation is used to express the average velocity...
Stochastic Mixed Finite Difference Method
Some aspects of numerical solutions of stochastic mechanics problems are considered. The Finite Difference method for discretization of stochastic continuous media problems is discussed....
Shear Resistance Models for Concrete Bridges
Statistical models are developed for the shear resistance of concrete bridge girders. Two structural types are considered: reinforced concrete T-beams and prestressed concrete AASHTO girders....
Fluid Dynamics at the Carotid Bifurcation
Arterial wall distensibility is believed to be of secondary importance to the general flowfield of the human carotid artery. However, it has been reported that it may have greater influence...
A Cumulative Failure Criterion of Concrete Under Uniaxial Dynamic Compressive Loading
It has been previously reported that the strength and critical strain of concrete under impact increase with strain rate, but neither of them can predict failure. A cumulative damage parameter...
Mechanical Properties of High Performance Concretes
This paper presents some of the initial results of a 4-year research project on mechanical properties of high performance concretes with particular reference to highway applications. High...
The Generalized Brazier Problem for Orthotropic Straight Tubes of Finite Length
A new engineering approach, based upon a mixed variational functional, is presented for the analysis of the nonlinear static behavior of thin-walled, circular-cross-section cylindrical...
Crushing Response of Energy Absorbing Composite Structure
A description of why and how composite structures crush and absorb energy is presented. The three primary crushing modes of composite structure (transverse shearing, lamina bending and...
Eigenproperties of a Twisted, Nonuniform Rotating Beam by the Finite Element Method
A initially twisted blade with nonuniform properties along the length, is rotating with constant angular velocity about an axis perpendicular to it's elastic axis. The blade is modeled...
An Expert System for Impeller Mechanical Design and Analysis
Impeller is the most critical component of centrifugal compressors. The mechanical efficiency and durability of the impeller determines the performance of the compressors. The shapes and...
A New NDT Device for Comprehensive Pavement Maintenance (Theoretical Aspects)
A new nondestructive testing (NDT) device is being developed to detect some precursors to pavement distress. The principle of operation of the device is based upon the generation and detection...
Flow Dynamics in an End-to-End Vascular Graft Junction
A study consisting of both experimental and numerical methods was performed to determine flow dynamics in the vicinity of an end-to-end anastomosis. The experimentally determined geometries...
Flexural and Shear Studies of Carbon Fiber Reinforced Beams
This paper presents the results of laboratory test on beams reinforced with three dimensional continuous carbon fiber grid. The grid is prefabricated by three-dimensional weaving and epoxy...
Modeling Bond Stress-Slip of Reinforcing Bars Embedded in SIFCON
A brief description is given of the mechanisms associated with the bond shear stress versus slip response of deformed reinforcing bars embedded in slurry infiltrated fiber concrete (SIFCON)....
Determination of Interfacial Shear and Normal Stresses in Fiber Pull-Out
In this paper we present an improved formulation for the pullout problem, wherein both the effects of fiber end condition and interfacial and frictional shear stresses are considered....
Failure Prediction of Anisotropic Material
Basic mathematical elements of a higher order failure theory for anisotropic material are outlined. Surface closure is ensured by requiring a tensor polynomial to satisfy constraint conditions....
Microcrack Interaction Toughening in Ceramics and CMCs
The generation of microcracks, which causes an extension of the damage zone at values of stress intensity factor, K, below the expected critical level represented by KIC...
Pattern Formation and Time-Dependence in Flowing Sand
The authors present results for a number of experiments on flowing granular materials and a novel cellular automata model for the flow of these materials when the grains are long and thin....
Modeling the Chaotic Behavior in Simple Shear Granular Flows
Simple shear granular flows have demonstrated a variety of puzzling phenomena. Both computer simulations and physical experiments have discovered particle grouping, layering and shear...
Return to search